Plastic Floor Liner Pallet Without Legs, Perforated Top

Plastic floor liner pallet without legs with perforated surface and good load capacity

Plastic floor liner pallet without legs with perforated surface is a low-profile sheet pallet made from recycled black plastic, specifically designed for stacking goods and creating a barrier between products and the floor.

The legless design allows the pallet to sit close to the floor, suitable for areas where height savings are needed but direct contact of goods with water, dust, and moisture should be minimized.

The product measures 1000 x 600 x 35 mm, with a neat rectangular shape, convenient for arrangement in warehouses, factories, cold storage, production areas, and processing facilities.

The surface is designed with multiple ventilation holes to allow quick water drainage, support air circulation, and facilitate cleaning. With a static load capacity of approximately 2,000 kg, the pallet meets the requirements for stacking drums, raw material bags, product packages, supplies, and various goods when placed fixed on a flat surface.

Legless design saves height

The pallet does not use raised legs like conventional transport pallets. Its height is only 35 mm, lifting goods off the floor without significantly increasing total storage height.

This design is suitable for warehouses with low shelving systems, areas under machinery, against walls, or locations where only a thin barrier between goods and the floor is needed.

The product is mainly used for stacking and floor lining. Before use with forklifts or lifting equipment, actual compatibility of the pallet should be checked.

Perforated ventilated surface

The pallet surface has many small evenly distributed holes, allowing water and liquids to drain quickly underneath.

The perforated surface design is suitable for cold storage, processing areas, food factories, or places frequently cleaned with water. Air can also circulate between goods and the floor, helping to reduce moisture accumulation.

Reinforcing ribs on the top and bottom surfaces help maintain stiffness and stability when goods are evenly distributed.

Static load capacity from 2,000 kg to 4,000 kg

The pallet has a static load capacity of approximately 2,000 kg - 4,000 kg when placed fixed on a flat surface with goods evenly distributed across the entire surface.

This load capacity is suitable for stacking:

• Carton boxes and packages.

• Raw material bags.

• Production supplies.

• Industrial components.

• Packaged consumer goods.

• Fixed warehouse goods.

Static load capacity does not equal load capacity during lifting or moving. Avoid concentrating the entire weight on a small point and do not use on uneven surfaces.

Compact size, easy to arrange

With dimensions of 1000 x 600 mm, the pallet can be used individually or combined side by side to create a larger floor lining area.

The rectangular shape facilitates placement:

• Along warehouse walls.

• Under shelving.

• In packing areas.

• At raw material collection points.

• In cold storage or food warehouses.

• In goods sorting areas.

Low height makes it convenient for stacking goods in spaces with limited clearance.

Easy to clean and reuse

Recycled black plastic pallets are not susceptible to termites or rot like wooden pallets. The surface can be cleaned with water or solutions suitable for the usage environment.

The ventilation holes allow water to drain quickly after washing, reducing surface water retention. When used within load limits and properly maintained, the product can be reused multiple times.

Applications of plastic pallets

Plastic floor liner pallets without legs with perforated surface are suitable for:

• Stacking goods in warehouses and factories.

• Floor lining in cold storage and raw material warehouses.

• Stacking drums, bags, and product packages.

• Limiting goods’ contact with damp floors.

• Separating raw material and finished goods areas.

• Floor lining in production and packing areas.

• Stacking supplies, components, and spare parts.

• Use in stores, supermarkets, and retail warehouses.

• Combining multiple sheets to create stacking areas.

• Replacing wooden stacking materials in some applications.

Advantages of plastic pallets

The pallet offers cost advantages by using recycled black plastic. It is suitable for internal stacking, floor lining, and fixed warehouse storage.

The legless design saves height. The perforated surface supports water drainage and ventilation. The black color hides dirt well, suitable for industrial environments.

The static load capacity of approximately 2,000 kg meets many warehouse stacking needs.

Technical specifications

• Product name: Plastic floor liner pallet without legs with perforated surface

• Dimensions: 1000 x 600 x 35 mm

• Static load capacity: Approximately 2,000 kg - 4,000 kg

• Material: Virgin plastic, recycled plastic

• Design: Sheet type, legless, perforated surface

• Color: Black

• Unit: Piece

• Category: Pallet

Purchase plastic pallets at Minh Quân Plastic

With dimensions 1000 x 600 x 35 mm, static load capacity around 2,000 kg - 4,000 kg, and ventilated perforated surface design, plastic floor liner pallets without legs are a suitable solution for stacking and floor lining in warehouses and factories at a reasonable cost.

The product is easy to clean, not susceptible to termites, and can be reused multiple times under proper usage conditions.

Customers needing bulk orders or price quotes can contact Minh Quân Plastic for detailed consultation.